J2 and J3 - General Information
Clarence Darden, the NC's Chief Mechanical Engineer designed both engines in Nashville and actually ended up with a patent or two for his design of a cast steel bed frame integral with cylinders, steam chests and various other engine parts cast into the one piece.
All 25 engines -- five J2's, Yellow Jackets #565-569, and twenty J3's, Stripes #570-590, --were built in Schenectady, NY by ALCO
While J2's and J3's were exclusively built and used by NC&St.L, their design features were later incorporated in steam engines built for every railroad in the U.S.
J2 |
J3 |
|
| Wheel Arrangement: | 4-8-4 |
4-8-4 |
| Drivers: | 70" dia. |
70" dia. |
| Weight on Drivers | 220,000 lbs |
228,000 lbs |
| Locomotive Weight: | 381,000 lbs |
400,500 lbs |
| Locomotive & Tender Weight: | 575,000 lbs |
685,500 lbs |
| Grate Area: | 77.3 sq ft |
77.3 sq ft |
| Cylinders (dia. x stroke): | (2) 25" x 30" |
(2) 25" x 30" |
| Boiler Pressure: | 250 psi |
250 psi |
| Tractive Effort: | 57,000 lbs |
57,000 lbs |
| Tender Capacity: Water: | 10,000 gals. |
15,000 gals |
| Tender Capacity: Coal: | 16 tons |
16 tons |
